Robert Hulthin

Veldig bra innstallert her i huset 😜

Må sjekkes ut ja

Lite sikt der ja 😵

https://orbxdirect.com/

https://fselite.net/products/737-ng3-for-msfs/

Her er noen å prøve ut varierende lengder 😉 i Sør Norge ENCN ENVE ENFY ENLU ENNO ENSI ENKJ EN15 ENEG ENHA EN10 ENV1 ENSM ENRE ENAE ENTS ENRI ENDO ENKL Legges det opp som rute så har du/dere en grei arbeidsdag i Kodiaken 😉 god tur

Fra manualen CONTROL CURVES We recommend setting all control curves to linear, to allow for finer control response. FLYING TECHNIQUE TAKE-OFF RUDDER TRIM The Kodiak has a very strong pull to the left at maximum power. When taking off, we recommend using 30-50% right trim. Reduce for a right crosswind, increase for a left crosswind. TAKE-OFF TRIM Take-off trim range in the Kodiak is 0 to 75% nose-down trim. More aft CG, more forward trim is required. As the G1000 in MSFS does cannot support the layout of the real Kodiak, we opted to include a white line on the trim wheel until the trim overlay is introduced. When the white line is pointing up vertically, trim will be centered. Rotating forward will trim down and rotating back will trim the nose up. The percentage of trim will be 50% when the line is pointing down. When the line is pointing down, trim is at 50% of travel. INFLIGHT To ensure a smooth flying experience, when preparing to trim the aircraft for any phase of flight: 1. Set torque to the desired value with the power lever 2. Pitch for trim 3. Pitch for rudder to centre the slip indicator 4. Pitch for roll if required. Higher power settings will require aileron trim. When making a turn with the aircraft trimmed, use the rudder pedals to centre the slip indicator. Cross-steering (movement of the yoke opposite to the rudder) may be required depending on the amount of rudder used.

Her er videoene

Tok en test tur i nærområdet opp fra Kjevik oppover dalen mot Valle i Setesdalen hvor det ble et par landinger på BUSH striper .. Denne maskinen leverer på "småstriper" type bush uten tvil Slenger ved noen bilder fra turen og et par videosnutter fra dagens tur Video kommer i neste innlegg 😉

Flott Paint 😛 GOD JUL til alle

Link til produktet hos simmarked https://secure.simmarket.com/simworks-studios-kodiak-100-wheels-msfs.phtml

Samme her i sør 3 minus og fjorden inn til Kjevik er hvit Mister en del realisme ved å ikke treffe bedre på været på bakken .........

Takker for update August Synd han kallen som leverte til ORBX er så vrien burde kastet seg i selen tvert og rettet opp .....

Måtte bare ha den jeg og just en liten test tur encn -enli Litt tilvending må til 😉

Ny oppdatering http://www.tasoftware.co.uk/?wpdmpro=plan-g-v4-0-0-255#

Ser bra ut Finni leverer som vanlig 😛

Kommet + oppdatering Aerosoft Simple traffic på ORBX Central

?? noe jeg ikke har fått med meg her ?

Rett plass å rette problemer mot er her https://www.workingtitle.aero/packages/nxi/ De prøver å følge opp de fleste problemer det jeg ser på Discord https://discord.gg/DTGQUPGA

03:06] Chris (Z-7): @everyone, we apologize, but there’s a bug with new v0.10.0 NXi package that launched on the Marketplace this evening that impacts three aircraft – specifically, the startup sequence related to electrical circuits on the DA62, the Caravan and the PC-6. On these aircraft there will be red X and shading over several components of the PFD along with the AHRS alignment message. If you fly these aircraft, we recommend not updating to v0.10.0 of the NXi just yet. Other G1000 equipped aircraft behave as expected. We apologize for this and a fix will be forthcoming, we’ll update here with more details as we work it out. Thanks for your patience. [19:28] Matt (nishmaster) [Z-5]: Hello @everyone, we now have the 0.10.1 hotfix available on the Marketplace, which fixes issues with being unable to proceed past bootup on certain aircraft. As always, this is an Early Access Opt-In Beta, so there may be bugs or missing features! Please give us feedback and reports on Discord in our nxi-early-access🥩 channel. Head to the sim Marketplace to grab the NXi, or go to Content Manager to download the update. You can find the full (and tiny) release notes here: https://www.workingtitle.aero/packages/nxi/2021/12/10/nxi-release-v0.10.1.html

Jeg bruker denne og er godt fornøyd slipper exsterne programmer da dette følger nvidia skjermkortet ( ALT+Z for å aktivere enkelt og greit )men må ha Geforce Experience innstallert sammen med skjermkortet

fix for services is online. Together with Asobo we were able to identify the issue. Start AIM and get the update Run Verify Setup Run Reset SimObjects

Ny update fra PMDG https://forum.pmdg.com/forum/main-forum/general-discussion-news-and-announcements/154537-08dec21-a-quick-round-of-updates-on-various-topics-across-pmdg-p3d-msfs-dc-6-737?fbclid=IwAR0VRLFlnY5n2CWmDCvnuumz-dXURb-6XXIP7Z16Zw4MTCLkDsks37mqo9k Pulling PMDG 737 for MSFS Release Timeline: This is a complicated topic that some folks will understand, and others will not. We have been planning for some time to release the long awaited PMDG 737 for MSFS prior to year end. We have made the difficult decision to remove the 737 release timeline from discussion temporarily. Tl;Dr: There are some changes and fixes needed on the MSFS platform that without, we cannot release the 737. We do not currently know when to expect those changes/fixes so we aren't comfortable putting a mark on the calendar until we have that information in our hands. That is an oddly shaped turn of phrase- and I want to explain a bit further what we are trying to convey: We are not just announcing a delay, or that we are moving the release timeline 30 days or 60 days or 120 days or 365. We are not saying the 737 won't release in January, February, or any other month in 2022. What we **are** saying is that we are putting a temporary hold on giving you any expectation as to when the release might happen because the release is going to be dependent upon some changes that we have requested from Asobo and we do not currently have any clarity as to when we might expect those changes to be made, if at all. If the changes will not be made, then we will be faced with removing some core functionality that we feel is important to the full enjoyment of the 737, no matter what platform you sim on. For that reason, we are hoping that our requests will be acted upon and we want to give the requests time to be digested, researched and understood by Asobo. Even if the changes we request are acted upon today- we will need to wait for them to wend their way through the testing and release process for MSFS, and such action and a timeline is unclear and thus we want to clarify that information before we simply move the 737 to a new date and hope things work out for the best.

Driveren til skjermkortet 497.09 lager visst trøbbel du finner eldre drivere her https://www.nvidia.com/en-us/geforce/drivers/