Ny versjon av Working Title mod for Garmin G3000

[Dag Baardsen]

For Daher TBM 930:

https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.4.0

 

[Dag Baardsen]

Oppdatert til 0.5.1 i dag: https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.5.1

[Hans Erik Bye]

Er det flere en meg som har problemer med Working  Title  g-3000 etter siste World update? MFD er i svart mens PFD er ok. 

[Dag Baardsen]

Svart MFD her også, og umulig å aktivere approach etter å ha valgt flyplasskode og approach. WT la ut endel info om problemer på Discord i går kveld.

Edit: Sorry, det var G1000

Endret 14. april 2021 av Dag Baardsen

[Robert Hulthin]

Den virker hos meg i TBM

 

 

[Hans Erik Bye]

9 timer siden skrev Robert Hulthin:

Den virker hos meg i TBM

 

 

Etter diverse forsøk på å slette, legge inn på nytt osv har jeg fått g-3000 til å virke. Men g-1000 funker fortsatt ikke. Takk for svar. Får følge med på WT, når de får en fix. Ser at mange sliter med det samme ja. 

[Hans Erik Bye]

Ser at WT nå har kommet med ny versjon av g-1000  v.0.3.5 👍 Da blir det testing i kveld ! 

[Robert Hulthin]

https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.6.0

Nå med Navigraph

 

This mod enables the G3000/5000 to natively display Navigraph charts. Use of this feature requires an active Navigraph Ultimate subscription (and internet connection). You will also need to link your Navigraph account within the sim. To do so, follow the instructions below:

1. Use the GTC (touchscreen controller) to navigate to MFD Home -> Utilities -> Database Status.
2. Click on the Navigraph Charts row. A pop-up will appear.
3. A browser window should open automatically. If this does not happen, you will need to manually open a browser and navigate to the provided URL.
4. You will be prompted to log in to your Navigraph account and allow access. The mod does not store your Navigraph username or password anywhere, nor does it even have access to this information at any point during the authentication process.
5. After completing step 4, press the "Link Account" button on the GTC pop-up. A message will appear on the GTC indicating either success or failure.

During a flight, you can check your Navigraph account link status in the GTC Database Status page. If both the Standby and Active fields display "Available", this means an account has been linked and chart database access is available. If the Standby field displays "Available" and the Active field displays "None", this means an account was linked but access has expired and you need to re-authenticate using the above process to restore chart database access. If both fields display "None", this means no Navigraph account has been linked.

 

[Chr. L]

Groovy, baby!

[Robert Hulthin]

https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.6.0
Siste versjon Bør lastes ned på nytt da det var STORE problemer med den samme link som over

Release highlights include a new traffic display and alerting system, Navigraph charts integration, performance optimizations, and some bug fixes. Please refer to the README.md and CHANGES.md files included in the zip file for more release information.

Addendum: The .zip file download on the release page has been updated as of 4/25/21 18:15 EDT (22:15 UTC) to fix a bug contained in the original release that would cause the PFD to freeze if the inset map was enabled. If you downloaded the zip prior to the above time, you should re-download the release to get the updated version. Note that the version number has not been incremented (it is still v0.6.0). I apologize for the inconvenience and that the bug was not caught in QA before the official release went up.(endret)

 

26. april 2021

 

[Robert Hulthin]

Går unna med oppdateringer https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.6.1
 

Description

This is a mod for MSFS2020 that aims to improve the in-game G3000 and G5000. The goal is to bring functionality closer to the real-life units, with a focus on both features and layout/UI.

This mod was created with cross-compatibility in mind. It modifies the minimum number of base files possible to achieve its goals, so it should be compatible with most other mods, including all other WorkingTitle mods. However, because of the nature of the mod, it will conflict with other mods that make changes to the G3000.

 

[Robert Hulthin]

https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.6.2
 

Latest version: v0.6.2

Description

This is a mod for MSFS2020 that aims to improve the in-game G3000 and G5000. The goal is to bring functionality closer to the real-life units, with a focus on both features and layout/UI.

This mod was created with cross-compatibility in mind. It modifies the minimum number of base files possible to achieve its goals, so it should be compatible with most other mods, including all other WorkingTitle mods. However, because of the nature of the mod, it will conflict with other mods that make changes to the G3000.

Installation

Download workingtitle-g3000-v0.6.2.zip from the Github release page. Do not download the Source code files unless you are sure you want those.

To install, copy the workingtitle-g3000 folder from the zip file into your Community directory.

Fixes

• [General] Fixed a bug with initializing airport data with no listed runways.
• [NavMap] While in TRACK UP mode on the ground, the compass arc's reference tick mark now correctly indicates the aircraft's current heading instead of ground track (which cannot always be reliably calculated on the ground).
• [Traffic] Fixed an error with ground track computation for traffic contacts.
• [PFD] Airspeed altimeter speed bugs are no longer mispositioned when airspeed is below the minimum indicated airspeed.
• [GTC] Fixed a bug where the Charts page would sometimes automatically change the selected airport after closing a popup or navigating back to it from the pan/zoom control page.

Enabling Offline AI and SimConnect (e.g. VATSIM) Traffic

The base sim only provides information on Live AI Traffic to JS/HTML instruments. As a result, by default the mod's traffic systems only support Live AI traffic. However, the mod provides the option to enable support for Offline AI and SimConnect-injected traffic using a third-party app. To do so, please complete the following steps:

1. Download and install laurinius's MSFS Traffic Service app (https://github.com/laurinius/MSFSTrafficService). The app requires .NET Core 3.1 to run (https://dotnet.microsoft.com/download).
2. Change the useTrafficService setting in the mod configuration file to true.
3. Start the MSFS Traffic Service app and ensure that the service is running (this can be done before or after starting the sim).
4. (Optional) Configure the port used by MSFS Traffic Service app by changing the port number within the app itself and changing the trafficServicePort setting in the mod configuration file to match. Not recommended unless the default port (8383) is not working and you know what you are doing.

[Dag Baardsen]

https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.7.0

 

Release Highlights for v0.7.0

• Added the ability to insert airways into flight plans.
• Added support for standby flight plans.
• Added the Flight Plan and Procedure Preview panes.
• Added the Flight Plan Text Inset window for the Navigation Map.
• For the Longitude: the GTC Flight Plan Keypad now supports direct entry of routes into flight plans (please refer to the changelog for the syntax).

Fixes

• [FPLN] Fixed a bug where the GTC Flight Plan page would display a different active leg from the navigation map and PFD navigation status bar.
• [GTC] The Flight Plan page should now report accurate leg-leg distances for all flight plan legs.
• [GTC] The Back button now works properly in the Procedure Selection pages.
• [GTC] The Waypoint Keyboard now provides accurate indications of when a match for the entered waypoint ident has been found.
• [GTC] Fixed a graphical glitch affecting certain touchscreen buttons.
• [Charts] The mod should now be better at "remembering" Navigraph account access and should not require account re-linking as frequently.
• [VFR Map] Fixed a bug preventing the VFR Map from being moved when it was not detached to a separate window.

[Frank Kristiansen]

Ble noe krøll med AP på TBM'en for meg etter denne oppdateringen. Kobler plutselig ut og gjør en kamikaze mot bakken...

Får sjekke om det er samme problem med andre fly.

[Robert Hulthin]

Får vente til "Frank" har fått sjekket litt mere ..
Noen andre med krøll på den ?

[Frank Kristiansen]

34 minutter siden skrev Robert Hulthin:

Får vente til "Frank" har fått sjekket litt mere ..
Noen andre med krøll på den ?

Merkelig... Virker i dag 🙂 

[Robert Hulthin]

Da LOADER vi ...Takk Frank 😉

[Robert Hulthin]

Known Issues

• [FPLN] There is currently a bug with the sim's built-in flight plan management system which prevents waypoints from being properly added to the flight plan while an approach is loaded. As a result, inserting waypoints or airways into the Enroute segment of the active flight plan with an approach loaded will desynchronize the FMS flight plan from the sim's flight plan and lead to unexpected behavior. As a workaround, enter waypoints before loading an approach. If you need to enter waypoints after an approach has been loaded, remove the approach, make the necessary edits, then reload the approach. Lastly, if the FMS active flight plan becomes desynchronized, you can fix it by deleting the active flight plan via the Flight Plan Options menu.
• [FPLN] There is another issue with the sim's built-in flight plan management system related to having consecutive legs with the same waypoint fix in the active flight plan (non-consecutive legs with the same waypoint fix are OK). This can cause numerous types of unexpected behavior. As such, avoid creating an active flight plan with consecutive legs with the same waypoint fix (the one exception is that the first approach leg may have the same fix as the leg immediately before it). Deleting the active flight plan via the Flight Plan Options menu will resolve any problems related to this bug.

[Robert Hulthin]

CJ4 updated to v0.12.5 - https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/cj4-v0.12.5
G1000 updated to v0.3.6 - https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g1000-v0.3.6
G3000 current version v0.7.0 should still work - https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.7.0
G3X updated to v0.1.0-dev7 - https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/gx-v0.1.0-dev7

[Robert Hulthin]

Går fort i svingan

21:03] Chris (Z-6): @everyone We have updated the G1000 and G3X after some reports of display update problems related to live traffic settings. We had a little merge error on our codebase for these updates that was resolved in updated versions of the G1000 and G3X. The other packages were not affected.

Working Title G1000 v0.3.7 - https://www.workingtitle.aero/packages/g1000/2021/05/25/g1000-release-v0.3.7.html
--Fixed bug that could cause display issues in the same area as live traffic in 1.16.2.0.

Working Title G3X v0.1.0-dev8 - https://www.workingtitle.aero/packages/g3x/2021/05/25/g3x-release-v0.1.0-dev8.html
--Fixed bug that could cause display issues in the same area as live traffic in 1.16.2.0.

 

[22:27] aznricepuff: @everyone G3000 v0.7.1 is now available: https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.7.1

This release fixes a compatibility issue with SU4 where approaches would not automatically activate. It also overhauls the GTC Direct To page and fixes a few other bugs. Please refer to the README.md and CHANGES.md files included in the zip file for more release information.

[Robert Hulthin]

https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.7.2

[Frank Kristiansen]

ENKJ RNAV/VNAV RWY12 ENNO fungerte i alle fall glimrende med siste versjon i TBM'en 🙂 

[Robert Hulthin]

https://github.com/Working-Title-MSFS-Mods/fspackages/releases/tag/g3000-v0.7.3
 

 

[Frank Kristiansen]

Nye versjoner av CJ4, G1000, G3000 og G3X tilgjengelig nå.

https://github.com/Working-Title-MSFS-Mods/fspackages

G1000 ligger nå som gratis download via Marketplace i simmen.

[Robert Hulthin]

Fikk en snodig cocpit nå etter oppdatering TBM 930 andre som har funnet ut av det ?

[Robert Hulthin]

fant ut av problemet slettet improvment pakken(tillegg) fra Community så kom den

[Jan R. Storelvmo]

Flere som har samme problem før jeg nå går i gang og installerer denne her? 

[Kjetil WombiiActual]

Ja, det ser ut som simulatoren nå har begynt å følge instillingene i model.cfg for visning av interiør og eksteriør på en annen (riktig) måte, så noen addons vil nok ha rare visninger.

[Robert Hulthin]

Ny versjon av fra Working Title LEGACY G1000 v0.4.0 (THIS IS NOT THE NXi) - https://www.workingtitle.aero/packages/g1000/2021/05/25/g1000-release-v0.4.0.html

 

En kan ikke ha begge inne samtidig !

[Hans Erik Bye]

8 timer siden skrev Robert Hulthin:

Ny versjon av fra Working Title LEGACY G1000 v0.4.0 (THIS IS NOT THE NXi) - https://www.workingtitle.aero/packages/g1000/2021/05/25/g1000-release-v0.4.0.html

 

En kan ikke ha begge inne samtidig !

La inn denne igjen, da jeg synes den er bedre en NXi versjonen. Men muligheten til å stille om til hPa er borte.. Er det bare meg, eller flere som opplever det samme ?