Hva "gjør" FLY! på SB..? ( Log av com.)

[Åge Olsen]

Log av FLY!-pilot her forleden:

Er det noen som blir klok på dette, hva "gjør" FLY! med SB..?

.......................................

SAS057: Trondheim, good eve SAS057 radiocheck

ENVA_V_APP: SAS057, Goodev. 5/5

SAS057: SAS057 with ATIS, startup for patternwork

ENVA_V_APP: SAS057, clrd patternwork 6000ft..squawk 5201

SAS057: ENVA_V_APP: SAS057, clrd patternwork 6000ft..squawk 5201

ENVA_V_APP: SAS057, correct...rpt ready for start/push

SAS057: ok clrd patternwork ENVA 6000ft sq 5201 057

SAS057: ready to push at this time 057

ENVA_V_APP: SAS057, start/push approved--rpt ready for taxi

SAS057: start approved - wilco taxi 057

SAS057: Ready to taxi

ENVA_V_APP: SAS057, taxi line up 27 via Y

SAS057: Line up 27 via Yankee 057

ENVA_V_APP: SAS057, correct

SAS057: Do you get multiple messeges?

SAS057: lined up 27 ready for dep

ENVA_V_APP: SAS057, winds 290/11 kt clrd takeoff 27

SAS057: clrd To 27 057

SK-APB: Good evening Værnes! SK-APB requesting clearance delivery from ENVA to ENKB

ENVA_V_APP: SK-APB, goodev. stby for clns...

SK-APB: rgr std byr

SAS057: SK-APB: rgr std byr

ENVA_V_APP: SK-APB, clrd ENKB flightplan route via rwy 27 hdg to 7000ft exp. FL 140 squawk 5202

SAS057: 6000ft maintaining

SK-APB: rgr route rwy 27 hdg to 7000ft exp FL140 sqw 5202

ENVA_V_APP: SAS057, t/l hdg 180

SAS057: left hdg 180 057

ENVA_V_APP: SK-APB, correct....rpt ready for start/push

SK-APB: ready for startup and p/b

SAS057: SK-APB: ready for startup and p/b

ENVA_V_APP: SK-APB, are you using FLY! ..?

SAS057: ENVA_V_APP: SK-APB, are you using FLY! ..?

SK-APB: sorry, what is FLY?

SAS057: SK-APB: sorry, what is FLY?

ENVA_V_APP: SAS057, something wrong here....multiple messagges....Im transmitting to both you..and SK APB

SAS057: ENVA_V_APP: SAS057, something wrong here....multiple messagges....Im transmitting to both you..and SK APB

ENVA_V_APP: SAS057, t/ l hdg 090

SAS057: ok... probably mty FLY creating problems

ENVA_V_APP: SK-APB, taxi line up 27 via Yankee rpt ready for dep.

SK-APB: SAS057: are you calling me, or is this a fault?

ENVA_V_APP: SK-APB, seems like you are receving mess. to SAS 057...

ENVA_V_APP: SAS057, left hdg 090

SAS057: left hdg 090 057

SK-APB: ENVA_APP: Rgr. txi to rwy 27 via yankee and line up, rpt ready for dep

SK-APB: rgr on message to SAS057

SAS057: SK-APB: rgr on message to SAS057

ENVA_V_APP: SAS057, this is actually confusing....I dont know to whom Im sending.. :-)

ENVA_V_APP: SK-APB, are you using FLY! too..?

SK-APB: negative

SAS057: So the messeges to SK recycles back to you with my callsign?

SAS057: if I'm creating problem - inform and I'll slog off

ENVA_V_APP: SAS057, SAS057 yes...and he is sending to both you and me.. (??)

ENVA_V_APP: SAS057, no probl....go on.....

SAS057: copy 057

SK-APB: lined up rwy 27, ready for dep

ENVA_V_APP: SK-APB, winds 290/11kt clr takeoff 27

SK-APB: rgr clr for T/O

SK-APB: airborne

ENVA_V_APP: SK-APB, copy

ENVA_V_APP: SAS057, t/l hdg 360...

SAS057: ENVA_V_APP: SAS057, t/l hdg 360...

SAS057: left 360 057

ENVA_V_APP: SAS057, multiple again....strange... :-)

SK-APB: est 7000ft

ENVA_V_APP: SK-APB, clr KVB vor FL 140

SAS057: this will be a fullstop

ENVA_V_APP: SAS057, rgr

SAS057: ENVA_V_APP: SAS057, rgr

SK-APB: rgr clr KVB FL140

ENVA_V_APP: SAS057, Echo - ENVA 101950Z 29009KT 9999 FEW020 SCT030 BKN050 12/07 Q1010

SAS057: copy QNH 1010 057

SK-APB: est on FL140

ENVA_V_APP: SAS057, desc. 5000ft t/l hdg 300 clrd ILS 27 appr.

SAS057: 5000ft lefty 3000 clrd ILS-app 27 057

SAS057: loc not active - req vectors

ENVA_V_APP: SAS057, fly hdg 270....

SAS057: hdg 270 057

SK-APB: ENVA_APP: Is ENKB within your area, or shall I maneuver on my own?

SAS057: SK-APB: ENVA_APP

ENVA_V_APP: SAS057, desc 4000ft rpt field in sight...

SAS057: ENVA_V_APP: SAS057, desc 4000ft rpt field in sight...

SAS057: 4000ft will call 057

SAS057: rwy in sight

ENVA_V_APP: SAS057, winds 290/09 clr to land 27

SAS057: clrd land 27 057

ENVA_V_APP: SK-APB, sorry late respons.....continue at own navigation....

SK-APB: rgr cont on own nav

SAS057: o57 vacated 27

ENVA_V_APP: SAS057, taxi gate of choise....sorru bad ATC....a bit confusing....skal jeg maile deg log av com-display..?

SAS057: Ja tack - det vore great 057

ENVA_V_APP: SAS057, ok...er dette et FLY! - problem..?

[bROADCAST: SSB_SR_SUP]: The Air Tran VA group flight (KATL to KMSP) begins in just 45 minutes!! See http://www.atva.f2s.com/mspinfo.htm" TARGET=_blank>www.atva.f2s.com/mspinfo.htm for info. That is all. <G>

SAS057: Stand by - jag kommer p Pro Controller

ENVA_V_APP: SAS057, ok

........................................

....ikke vet jeg - det eneste jeg vet er at det hele ble temmelig forvirrende.. [image]http://www.flightsim.no/ubb/images/icons/grin.gif[/image]

Som der ser gikk det forsåvidt greit før fly nr. 2 dukket opp....

------------------

Åge Olsen, Molde

atcc@molde.online.no

http://home.sol.no/~es/" TARGET=_blank>VACC Norway

[Edited by Åge Olsen 13-06-2000.]

[Ivar Amundsen]

Det er jammen ikke godt å si, men 10 stykker av samme sort samtidig skulle vel gi fart på ørevoksen. [image]http://www.flightsim.no/ubb/images/icons/grin.gif[/image] Det synes som om det er Staffan Holst som testet FLY, han postet tidligere et innlegg om problemer FLY/SB.

Lykke til!

mvh

Ivar

[Tarjei Lundarvollen]

Har testet FLY! og SB litt og har samme problemene, endel meldinger går i "loop" (noe i uendelig loop til og med), tror nok vi må vente på neste beta av SB [image]http://www.flightsim.no/ubb/images/icons/smile.gif[/image]

Vennlig hilsen

Tarjei Lundarvollen

[Gjest]

Hei.

Dere som bruker FLY! med SB 2.2.2 og får loops som går over com til controller:

Flere har sagt at løsningen er å tune com freq MANUELT i fly!'s radio stack. da vil de ikke bli loops.

Jan Roar Rød

[Staffan Holst]

Hi!

I have tried to keep the chatwindow inactive at every time I was not actually typing in it and for a while I thought that the loopback problem was solved. Unfortunately the broblem came back. I have now tried to tune in the radiofreq in the radiostack but this didn't help either. The only solution is to use voice and stay off any active freq but since there always are at least one or two text controllers during a normal leg this is not an option. Still waiting for the solution.

 

Best regards

Staffan