Selger nytt 737 MCP/EFIS CDU/FMC B737 throttle

Hei jeg hadde planer om og bygge en boing 737 copickt men prosjektet er blitt lakt på is. Derfor ønsker jeg og selge delene jeg har kjøpt for hall pris som ikke er brukte.

Dette gjelder da En throttle til 737 og en MCp med 2 stk Efis og en Cdu. Dette selger jeg for halv pris er du inntresert ta konakt med meg på stiar@online.no Nedenfor er det spesifikasjoner om produktetene. disse productene er kjøpt i nederland og tyskland.

MCP 737NG ( FS2004, PMDG, Level-D,Project Magenta compatible, Warm white backlight )

Finally the hardware you were waiting for your flight deck. MCP737 is the most affordable Boeing 737 MCP hardware to interface with Microsoft Flight Simulator, but furthermore, MCP737 forms the center of an easily expandable system with capability to drive digital and analog I/O in its basic version and also allows additional hardware to be daisy-chained through it. MCP737 come by flight simulation enthusiasts to make easier your cockpit building; all the tedious work was already done, you simply plug it in, install the software and ...take off.

MCP737 is connected to the PC through a USB connection and interfaces with Microsoft FS2002/FS2004 and the newest FSX. The MCP737 can also be connected to Project Magenta software. The MCP737`s panel is 1" thick (excluding knobs and rear connector). MCP737 gives you a flexible system, able to satisfy who needs more realism in his flight (using real switches, buttons and knobs), up to the enthusiast that intends to reproduce a realistic Boeing 737 flight deck. MCP737 comes ready for panel assembling.

You could place it in your cockpit glareshield, fixing it by the hole arranged on front-plate, or you could lean it on your desk using the aluminum brace available as an option.

The following supported functions are:Rotary Switches: Course, IAS/MACH, Heading, Altitude, Vert Speed

Toggle Switches: F/D, A/P Disengage, A/TPush Switches: N1, Speed, LVL CHG, APP, ALT HLD, V/S, CMD A/B, IAS/Mach Select

MCP737 is also operating with PMDG series 737/747 and LVLD767

---------------------------------------------------------

Boeing 737NG CDU/FMC for use with Project Magenta & PMDG 737 and Level D 767

737NG CDU/FMC.

Programming your flight will now be more realistic then ever. Engravity introduces the fully functional 737NG CDU/FMS.

All features, like found in the real ones, are included and the CDU comes as a completely build unit. So no need to wire, solder or program anything yourself. Plug in your USB, connect to Project Magenta software CDU and you are ready to plan your flight. See all info projected on the build in 5" LCD display. . . . It is that simple !

Flightsim software compatible:

. Project Magenta Boeing Glass Cockpit Software and PMDG 737NG Series.

. PMDG Boeing 737NG 600/700 800/900 (driver can be purchased separately at www.precisionmanuals.com)

Features:

. Integrated 5" LCD-display

. Injection molded hard keys

. Adjustable backlight

. Amber coloured backlight in every single key

. Full 1:1 size, just as original

. USB plug and play connection

. no need to build, wire or solder

. No need for extra graphic card, video interface just USB

Included are:

. 12V DC adapter

. USB cable

. Driver Software

Dimensions:

146 x 226 x 25 mm

----------------------------------------------------------

EFIS-NS selection panel 737NG ( With warm white backlight )

EFIS737 reproduce the EFIS selector located on the Boeing 737NG cockpit glareshield. Through a jumper EFIS737 can operate as captain or F/O selector (with Project Magenta only). EFIS737 is also operating with PMDG series 737/747 and LVLD767. EFIS737 have backlight controlled by the MCP and support all functions. The module is directly powered by the MCP737 and do not require any configuration. EFIS737 is directly powered and drived by the MCP737 through a single 5 pole cable (provided) and like all others CPflight modules have a second socket to allow the connection ot further devices (daisy chain).

Important notice !

Only for new MCP USB version users.

Note: ATC737 is an expansion modules and require MCP737 usb version or MCP Proffesional, to operate

-------------------------------------------------------------

B737 throttle unit - includes stepper motors on lever axes and trim wheel axis. All necessary pots and switches installed - USB interface required

Har du en minstepris/prisantydning? Selges det separat? OSV...

Jeg er interessert i cdu og throtle. Mail sendt

hei, hvilket "fabrikat" er det, det finner jeg ikke i teksten din, har du en link?

Jeg lurer på hvor mye du skal ha for 737MCP.

Ja det selgest selvsagt seperat.

ISBN/Box : EFIS737NS

Serie : FS2004, Magenta

Publisher : CP Flight

og

ISBN/Box : 737CDU

Serie : FS2004, FSX

Publisher : Engravity

Format : 1 :1

og

ISBN/Box : MCP737US

Serie : FSX, FS2004, FS2002

Publisher : CP Flight

og 737 throttle

er cockpitsonic

sin veriant

ny pris på mcp er 538.61 euro omreknet 4 930,29kr + 25% moms.

jeg har sakt halv pris.NB er ikke brukt. selger med kviteringen og garantier Efis har jeg som tilhører denne enheten koster per stykk nye 1 823,66 kr +25% moms og frakt.

halv pris av dette skal jweg ha

Pris på throttle?

selges for:

Hei i gjen!!

Priser jeg skal ha for produktene er som følger:

for cdu 5143 kr for

Mcp 3081.25 kr for

EFIS 1139 kr per stk. For begge 2278

Dette er ikke brukt

så totalt 10502 er prisen.

Mvh: stian

det ligger bilder og produktbeskrivelse på finn.no finn koden er 16157034.

Her er det en direkte link til annonsen:

http://www.finn.no/finn/bap/object?finnkode=16157034

har du selt denne cdu

jeg er intresert

ring meg på 98245538

Cdu er desverre solgt.